How to use the Ohm's law calculator
- Type any two of voltage, current, resistance and power, and pick their units.
- The other two appear instantly, with the formulas used.
- Press Clear to start again with different known values.
Ohm's law formulas
| Find | From V and I | From V and R | From I and R | From P and … |
|---|---|---|---|---|
| Voltage V | – | – | I × R | P ÷ I, √(P × R) |
| Current I | – | V ÷ R | – | P ÷ V, √(P ÷ R) |
| Resistance R | V ÷ I | – | – | V² ÷ P, P ÷ I² |
| Power P | V × I | V² ÷ R | I² × R | – |
Example: an LED resistor
A red LED needs 2 V and 20 mA, and you're powering it from 5 V. The resistor must drop 5 − 2 = 3 V at 0.02 A, so R = 3 ÷ 0.02 = 150 Ω, and it dissipates 3 × 0.02 = 0.06 W, well within a common ¼ W resistor.
For AC loads with a power factor, use the electrical power calculator. To split a voltage with two resistors, try the voltage divider calculator.
Frequently asked questions
Ohm's law says the current through a conductor is proportional to the voltage across it: V = I × R. Voltage V is in volts, current I in amps and resistance R in ohms. A 12 V supply across a 4 Ω resistor drives 12 ÷ 4 = 3 A.
Power is P = V × I. Combining it with V = I × R gives P = I² × R and P = V² ÷ R. The 4 Ω resistor above dissipates 12 × 3 = 36 W, so it needs a resistor rated well above 36 W.
Yes. Fill in any two of the four fields and leave the other two empty; the calculator works out the rest. If you fill in more than two, clear the ones you want calculated.
Yes. Choose the unit next to each field: mV, V or kV; µA, mA or A; Ω, kΩ or MΩ; mW, W or kW. Results are shown in the most readable unit.
For purely resistive AC loads, yes, using RMS values. Circuits with capacitors or inductors have impedance Z instead of plain resistance, and power also depends on the power factor. Use the electrical power calculator for AC loads with a power factor.