NathanTools
NathanTools
Text Tools 13
SEO Tools 7
Image Tools 19
YouTube Tools 38
Device Tests 4
PDF Tools 10
Calculators 52
Electrical Calculators 10
Time Tools 7
Random Tools 9
Converters 14
Developer Tools 11
Hash Generators 5
Password & Security 2
Network & DNS 3
Website Tools 9

Electrical Power Calculator

Convert between watts, amps, volts, kW, kVA and VA for DC and AC circuits.

100% free No sign-up Works on any device

–

–

Updated November 2026 · Calculated in your browser

How to use the calculator

  1. Choose the conversion, such as watts to amps or kVA to kW.
  2. Pick DC, AC single-phase or AC three-phase. For three-phase, enter the line-to-line voltage.
  3. Enter the values asked for. For AC, set the power factor: 1 for heaters and lights, about 0.8 for motors.

Electrical power formulas

FindDCAC single-phaseAC three-phase
Watts PV × IPF × V × I√3 × PF × V × I
Amps IP ÷ VP ÷ (PF × V)P ÷ (√3 × PF × V)
Volts VP ÷ IP ÷ (PF × I)P ÷ (√3 × PF × I)
VA SV × IV × I√3 × V × I

All conversions

Need resistance too? Use the Ohm's law calculator. Working out running costs? Try the electricity cost calculator.

Frequently asked questions

Pick the conversion, choose DC, AC single-phase or AC three-phase, and enter the values. Watts, amps and volts are linked by P = V × I (times the power factor on AC), so you always need two of them to find the third.

The ratio of real power (watts) to apparent power (volt-amps) in an AC circuit, between 0 and 1. Resistive loads like heaters and kettles have a PF of 1. Motors, compressors and older fluorescent ballasts are often 0.7 to 0.9. Modern electronics with power-factor correction are usually above 0.95.

For three-phase supplies, common in commercial buildings and for large motors. Enter the line-to-line voltage, for example 400 V in Europe or 208 V or 480 V in the US. Three-phase formulas include √3 ≈ 1.732.

Watts measure real power that does work. Volt-amps (VA) measure apparent power, simply volts × amps. They're equal when the power factor is 1; otherwise watts = VA × PF. Wiring, fuses and transformers must carry the full VA.
Esc
↑ ↓ to moveEnter to open