How to use the dB calculator
- Pick power ratio (amplifier gain, attenuation), voltage ratio (signal levels, sound pressure) or dBm (RF and audio power).
- Type in any box. The matching values in the other boxes update instantly.
- Use Add levels to combine sound or signal levels correctly.
Decibel formulas
Power: dB = 10 log₁₀(P₂/P₁) Voltage: dB = 20 log₁₀(V₂/V₁)
dBm = 10 log₁₀(P ÷ 1 mW) P(mW) = 10^(dBm/10) dBW = dBm − 30
Quick reference
| dB | Power ratio | Voltage ratio |
|---|---|---|
| -20 dB | 0.01 | 0.1 |
| -10 dB | 0.1 | 0.316 |
| -6 dB | 0.251 | 0.501 |
| -3 dB | 0.501 | 0.708 |
| 0 dB | 1 | 1 |
| +3 dB | 1.995 | 1.413 |
| +6 dB | 3.981 | 1.995 |
| +10 dB | 10 | 3.162 |
| +20 dB | 100 | 10 |
| +30 dB | 1000 | 31.623 |
| +40 dB | 10000 | 100 |
| dBm | Power | Typical example |
|---|---|---|
| 60 dBm | 1 kW | Small broadcast transmitter |
| 30 dBm | 1 W | Phone transmitting at full power (roughly) |
| 20 dBm | 100 mW | Wi-Fi router output |
| 0 dBm | 1 mW | Reference level |
| −50 dBm | 10 nW | Good Wi-Fi signal at the device |
| −90 dBm | 1 pW | Weakest usable Wi-Fi / mobile signal |
Need logarithms in general? Use the log calculator.
Frequently asked questions
A decibel (dB) expresses a ratio on a logarithmic scale. For power, dB = 10 × log₁₀(P₂ ÷ P₁): doubling the power is +3 dB, ten times the power is +10 dB and a hundred times is +20 dB. Because it's a ratio, dB on its own has no unit; dBm, dBW and dBV add a reference.
Power is proportional to voltage squared (P = V² ÷ R), and log(V²) = 2 log V. So for voltage, current or sound pressure, dB = 20 × log₁₀(V₂ ÷ V₁). Doubling a voltage is +6 dB, and ten times the voltage is +20 dB, the same as a hundred times the power.
dBm is power relative to 1 milliwatt: dBm = 10 × log₁₀(P ÷ 1 mW). 0 dBm = 1 mW, 30 dBm = 1 W, and −30 dBm = 1 µW. Wi-Fi signals are typically −30 dBm (excellent) to −80 dBm (weak). dBW uses 1 watt as the reference, so dBW = dBm − 30.
You can't add the dB numbers directly. Convert each to a power ratio, add, then convert back: L = 10 × log₁₀(10^(L₁/10) + 10^(L₂/10)). Two 80 dB sources together make 83 dB, not 160 dB. Use the “Add levels” tab.