NathanTools
NathanTools
Text Tools 13
SEO Tools 7
Image Tools 19
YouTube Tools 38
Device Tests 4
PDF Tools 10
Calculators 52
Electrical Calculators 10
Time Tools 7
Random Tools 9
Converters 14
Developer Tools 11
Hash Generators 5
Password & Security 2
Network & DNS 3
Website Tools 9

Watts to Amps Calculator

You need the voltage. On AC, motors and other inductive loads also need the power factor; heaters and incandescent bulbs have a PF of 1. Enter your values to convert watts to amps instantly.

100% free No sign-up Works on any device

–

–

Updated November 2026 · Calculated in your browser

Watts to Amps formula

DC: I = P ÷ V AC single-phase: I = P ÷ (PF × V) AC three-phase: I = P ÷ (√3 × PF × V)

Example: A 1,500 W heater on 120 V draws 1,500 ÷ 120 = 12.5 A.

You need the voltage. On AC, motors and other inductive loads also need the power factor; heaters and incandescent bulbs have a PF of 1.

How to use the calculator

  1. Choose the conversion, such as watts to amps or kVA to kW.
  2. Pick DC, AC single-phase or AC three-phase. For three-phase, enter the line-to-line voltage.
  3. Enter the values asked for. For AC, set the power factor: 1 for heaters and lights, about 0.8 for motors.

Electrical power formulas

FindDCAC single-phaseAC three-phase
Watts PV × IPF × V × I√3 × PF × V × I
Amps IP ÷ VP ÷ (PF × V)P ÷ (√3 × PF × V)
Volts VP ÷ IP ÷ (PF × I)P ÷ (√3 × PF × I)
VA SV × IV × I√3 × V × I

All conversions

Need resistance too? Use the Ohm's law calculator. Working out running costs? Try the electricity cost calculator.

Frequently asked questions

You need the voltage. On AC, motors and other inductive loads also need the power factor; heaters and incandescent bulbs have a PF of 1. The formula is DC: I = P ÷ V; AC single-phase: I = P ÷ (PF × V); AC three-phase: I = P ÷ (√3 × PF × V). A 1,500 W heater on 120 V draws 1,500 ÷ 120 = 12.5 A.

The ratio of real power (watts) to apparent power (volt-amps) in an AC circuit, between 0 and 1. Resistive loads like heaters and kettles have a PF of 1. Motors, compressors and older fluorescent ballasts are often 0.7 to 0.9. Modern electronics with power-factor correction are usually above 0.95.

For three-phase supplies, common in commercial buildings and for large motors. Enter the line-to-line voltage, for example 400 V in Europe or 208 V or 480 V in the US. Three-phase formulas include √3 ≈ 1.732.

Watts measure real power that does work. Volt-amps (VA) measure apparent power, simply volts × amps. They're equal when the power factor is 1; otherwise watts = VA × PF. Wiring, fuses and transformers must carry the full VA.
Esc
↑ ↓ to moveEnter to open