How to use the paint calculator
- Measure the room's length, width and wall height.
- Count the doors and windows, and choose how many coats.
- Check the coverage on your paint can (350 sq ft per gallon is a safe default) and tick Include ceiling if you're painting it too.
- Buy the gallons and quarts shown. It's worth keeping a little left over for touch-ups.
The paint formula
Wall area = 2 × (Length + Width) × Height
Paint = (Wall area − Doors − Windows + Ceiling) × Coats ÷ Coverage
Example: a 14 × 12 ft room with 8 ft walls has 2 × (14 + 12) × 8 = 416 sq ft of wall. Take off one door (21 sq ft) and two windows (30 sq ft) to get 365 sq ft. Two coats is 730 sq ft ÷ 350 = 2.1 gallons: buy 2 gallons and 1 quart.
Paint coverage guide
| Surface | Typical coverage per gallon |
|---|---|
| Smooth, previously painted walls | 350–400 sq ft |
| New drywall (with primer) | 300–350 sq ft |
| Textured walls or ceilings | 250–300 sq ft |
| Rough or porous surfaces (brick, stucco) | 150–250 sq ft |
Need the floor area too? Use the square footage calculator.
Frequently asked questions
Add up the lengths of the walls, multiply by the wall height, subtract doors and windows, then multiply by the number of coats and divide by the paint's coverage. A 12 × 14 ft room with 8 ft walls, one door and two windows has about 365 sq ft to paint; two coats at 350 sq ft per gallon need about 2.1 gallons, so buy 2 gallons and a quart.
Most interior wall paints cover about 350–400 square feet per gallon (roughly 9–10 m² per litre) for one coat on a smooth, primed surface. Textured, porous or unprimed surfaces can take much more, so check the coverage on the can.
Two coats is standard for an even, durable finish. One coat can be enough when repainting the same colour in good condition. Going from a dark to a light colour, or painting new drywall, may need primer plus two coats.
The calculator subtracts about 21 sq ft (2 m²) for a standard door and 15 sq ft (1.4 m²) for an average window. For very large windows or sliding doors, measure them and add an equivalent number of windows.
Tick “Include ceiling” and the ceiling area (length × width) is added. Ceiling paint is usually a flat white with similar coverage. For a 12 × 14 ft room that's 168 sq ft per coat.