How to use the percent error calculator
- Enter your measured value, the result you got in the experiment.
- Enter the true value, the accepted or theoretical figure from a textbook or reference.
- Read the percent error, the signed error (above or below the true value) and the working.
Percent error formula
Percent error = |measured − true| ÷ |true| × 100
Example: a student measures the boiling point of water as 98.2 °C. The accepted value is 100 °C, so the percent error is |98.2 − 100| ÷ 100 × 100 = 1.8%. The signed error is −1.8%: the measurement was low.
Percent difference formula
Percent difference = |a − b| ÷ ((a + b) ÷ 2) × 100
Use percent difference when you compare two trials and neither is the "right" answer. Two lab groups measuring 4.5 s and 4.9 s for the same pendulum differ by 0.4 ÷ 4.7 × 100 = 8.51%.
Common sources of error
- Systematic error: a bias that pushes every reading the same way, such as an uncalibrated scale.
- Random error: small unpredictable changes between readings; repeat the measurement and average it.
- Human error: misreading an instrument or timing by hand. Reaction time alone adds about 0.2 s.
Need a percentage change instead? Use the percentage calculator.
Frequently asked questions
Subtract the true (accepted) value from the measured value, take the absolute value, divide by the absolute true value and multiply by 100. Measuring 9.6 m/s² for gravity (true value 9.81): |9.6 − 9.81| ÷ 9.81 × 100 = 2.14%.
The usual percent error uses absolute values, so it's never negative. Some lab courses keep the sign to show direction: a negative signed error means the measurement was below the true value, a positive one means it was above. The calculator shows both.
It depends on the experiment. In school labs, under 5% is often considered good and under 1% excellent. Precision manufacturing or analytical chemistry may need errors well under 0.1%. Compare against the tolerance your instructions give.
Percent error compares a measurement with a known true value. Percent difference compares two measurements when neither is known to be correct, dividing by their average: |a − b| ÷ ((a + b) ÷ 2) × 100. Switch the mode above to calculate it.
Percent error divides by the true value, and dividing by zero is undefined. If the expected value is zero, report the absolute error (the plain difference) instead.