How to use the DMS converter
- Type an angle or a latitude/longitude pair in almost any format:
40°26'46"N,40 26 46 N,40.4461,-79.982or45° 30.5'. - Read it in decimal degrees, DMS (degrees, minutes, seconds) and DDM (degrees and decimal minutes).
- For a coordinate pair, open the point in a map to check it.
Formulas
DD = D + M ÷ 60 + S ÷ 3,600
D = ⌊DD⌋, M = ⌊(DD − D) × 60⌋, S = ((DD − D) × 60 − M) × 60
Distance per unit
| Unit | Decimal degrees | Distance at the equator |
|---|---|---|
| 1 degree | 1 | 111.32 km (69.17 mi) |
| 1 minute | 0.016667 | 1.855 km (1 nautical mile) |
| 1 second | 0.000278 | 30.9 m |
| 0.0001° | 0.0001 | 11.1 m |
| 0.000001° | 0.000001 | 11.1 cm |
Converting degrees to radians or gradians instead? Use the angle converter.
Frequently asked questions
Decimal degrees = degrees + minutes ÷ 60 + seconds ÷ 3,600. For 40° 26′ 46″: 40 + 26/60 + 46/3600 = 40.4461°. Make it negative for south latitudes and west longitudes.
The whole number is the degrees. Multiply the remaining fraction by 60: the whole part is the minutes. Multiply what's left by 60 again for the seconds. 40.4461° → 40°, 0.4461 × 60 = 26.766′ → 26′, 0.766 × 60 = 45.96″ → 40° 26′ 46″.
Latitude is north (N) or south (S) of the equator, from 0° to 90°. Longitude is east (E) or west (W) of the Greenwich meridian, from 0° to 180°. In decimal degrees, south and west are written as negative numbers: 33.8688° S, 151.2093° E is −33.8688, 151.2093.
At the equator, 1° of latitude is about 111 km. So 4 decimal places (0.0001°) is about 11 m, 5 places about 1.1 m and 6 places about 11 cm. One arcsecond is about 31 m.
A mixed format used by GPS units and marine charts: whole degrees and decimal minutes, such as 40° 26.766′ N. The converter shows it alongside DMS and decimal degrees.